Série
E5I86
ALU-POWER HPC 3FL 37° Helix Chip-Breaker Corner Radius End Mill
Corner RadiusPlain Shank
EDP de referência: E5I86060
Características técnicas
Tool Material
Flute
3Flute
Helix
37°
Shank Type
Plain
Feature
- ▶Balanced cutting with less vibration ▶ Ability to run at higher speeds with less heat in aluminum ▶ Chip Breaker Improves chip evacuation by shortening the chip length ▶ Ability to counteract extreme radial forces
Operações aplicadas
Dimensões (24 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| E5I86060 | R0.25 | 6 | 6 | 13 | — | 57 | +0.008~-0.008 | h5 | 3 | — |
| E5I86080 | R0.25 | 8 | 8 | 19 | — | 63 | +0.009~-0.009 | h5 | 3 | — |
| E5I86100 | R0.5 | 10 | 10 | 22 | — | 72 | +0.010~-0.010 | h5 | 3 | — |
| E5I86120 | R0.5 | 12 | 12 | 26 | — | 83 | +0.010~-0.010 | h5 | 3 | — |
| E5I86160 | R1 | 16 | 16 | 32 | — | 92 | +0.010~-0.010 | h5 | 3 | — |
| E5I86200 | R1 | 20 | 20 | 38 | — | 104 | +0.013~-0.013 | h5 | 3 | — |
| E5I86901 | R1.5 | 6 | 6 | 13 | — | 57 | +0.008~-0.008 | h5 | 3 | — |
| E5I86902 | R0.25 | 6 | 6 | 24 | — | 75 | +0.008~-0.008 | h5 | 3 | — |
| E5I86903 | R1.5 | 6 | 6 | 24 | — | 75 | +0.008~-0.008 | h5 | 3 | — |
| E5I86904 | R2 | 8 | 8 | 19 | — | 63 | +0.009~-0.009 | h5 | 3 | — |
| E5I86905 | R0.25 | 8 | 8 | 32 | — | 75 | +0.009~-0.009 | h5 | 3 | — |
| E5I86906 | R2 | 8 | 8 | 32 | — | 75 | +0.009~-0.009 | h5 | 3 | — |
| E5I86907 | R2 | 10 | 10 | 22 | — | 72 | +0.010~-0.010 | h5 | 3 | — |
| E5I86908 | R0.5 | 10 | 10 | 40 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I86909 | R2 | 10 | 10 | 40 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I86910 | R3 | 12 | 12 | 26 | — | 83 | +0.010~-0.010 | h5 | 3 | — |
| E5I86911 | R0.5 | 12 | 12 | 48 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I86912 | R3 | 12 | 12 | 48 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I86913 | R4 | 16 | 16 | 32 | — | 92 | +0.010~-0.010 | h5 | 3 | — |
| E5I86914 | R1 | 16 | 16 | 64 | — | 125 | +0.010~-0.010 | h5 | 3 | — |
| E5I86915 | R4 | 16 | 16 | 64 | — | 125 | +0.010~-0.010 | h5 | 3 | — |
| E5I86916 | R4 | 20 | 20 | 38 | — | 104 | +0.013~-0.013 | h5 | 3 | — |
| E5I86917 | R1 | 20 | 20 | 80 | — | 150 | +0.013~-0.013 | h5 | 3 | — |
| E5I86918 | R4 | 20 | 20 | 80 | — | 150 | +0.013~-0.013 | h5 | 3 | — |