Série
GYF96
ONLY ONE 4 Flute30°Helix Short End mill
SquareFlat Shank
EDP de referência: GYF96010
Características técnicas
Tool Material
PM60
Flute
4Flute
Coating
Y-Coating
Helix
30°
Shank Type
Flat (DIN 1835B)
Geometry Standard
DIN 844
Feature
- ▶Better Tool Life than Coated Solid Carbide End mills due to very good toughness
- ▶Excellent Performance for Roughing and can be also used for Exotic Material
Operações aplicadas
Dimensões (17 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| GYF96010 | — | 1 | 6 | 3 | — | 49 | 0~-0.030 | h6 | 4 | — |
| GYF96020 | — | 2 | 6 | 7 | — | 51 | 0~-0.030 | h6 | 4 | — |
| GYF96030 | — | 3 | 6 | 8 | — | 52 | 0~-0.030 | h6 | 4 | — |
| GYF96040 | — | 4 | 6 | 11 | — | 55 | 0~-0.030 | h6 | 4 | — |
| GYF96050 | — | 5 | 6 | 13 | — | 57 | 0~-0.030 | h6 | 4 | — |
| GYF96060 | — | 6 | 6 | 13 | — | 57 | 0~-0.030 | h6 | 4 | — |
| GYF96070 | — | 7 | 8 | 16 | — | 66 | 0~-0.030 | h6 | 4 | — |
| GYF96080 | — | 8 | 8 | 19 | — | 69 | 0~-0.030 | h6 | 4 | — |
| GYF96090 | — | 9 | 10 | 19 | — | 69 | 0~-0.030 | h6 | 4 | — |
| GYF96100 | — | 10 | 10 | 22 | — | 72 | 0~-0.030 | h6 | 4 | — |
| GYF96120 | — | 12 | 12 | 26 | — | 83 | 0~-0.030 | h6 | 4 | — |
| GYF96140 | — | 14 | 12 | 26 | — | 83 | 0~-0.030 | h6 | 4 | — |
| GYF96160 | — | 16 | 16 | 32 | — | 92 | 0~-0.030 | h6 | 4 | — |
| GYF96180 | — | 18 | 16 | 32 | — | 92 | 0~-0.030 | h6 | 4 | — |
| GYF96200 | — | 20 | 20 | 38 | — | 104 | 0~-0.030 | h6 | 4 | — |
| GYF96220 | — | 22 | 20 | 38 | — | 104 | 0~-0.030 | h6 | 4 | — |
| GYF96250 | — | 25 | 25 | 45 | — | 121 | 0~-0.030 | h6 | 4 | — |