Série
GYF99
ONLY ONE 2 Flute30°Helix Short End mill
SquareFlat Shank
EDP de referência: GYF99010
Características técnicas
Tool Material
PM60
Flute
2Flute
Coating
Y-Coating
Helix
30°
Shank Type
Flat (DIN 1835B)
Geometry Standard
DIN 327
Feature
- ▶Better Tool Life than Coated Solid Carbide End mills due to very good toughness
- ▶Excellent Performance for Roughing and can be also used for Exotic Material
Operações aplicadas
Dimensões (17 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| GYF99010 | — | 1 | 6 | 2.5 | — | 47 | 0~-0.030 | h6 | 2 | — |
| GYF99020 | — | 2 | 6 | 4 | — | 48 | 0~-0.030 | h6 | 2 | — |
| GYF99030 | — | 3 | 6 | 5 | — | 49 | 0~-0.030 | h6 | 2 | — |
| GYF99040 | — | 4 | 6 | 7 | — | 51 | 0~-0.030 | h6 | 2 | — |
| GYF99050 | — | 5 | 6 | 8 | — | 52 | 0~-0.030 | h6 | 2 | — |
| GYF99060 | — | 6 | 6 | 8 | — | 52 | 0~-0.030 | h6 | 2 | — |
| GYF99070 | — | 7 | 8 | 10 | — | 60 | 0~-0.030 | h6 | 2 | — |
| GYF99080 | — | 8 | 8 | 11 | — | 61 | 0~-0.030 | h6 | 2 | — |
| GYF99090 | — | 9 | 10 | 11 | — | 61 | 0~-0.030 | h6 | 2 | — |
| GYF99100 | — | 10 | 10 | 13 | — | 63 | 0~-0.030 | h6 | 2 | — |
| GYF99120 | — | 12 | 12 | 16 | — | 73 | 0~-0.030 | h6 | 2 | — |
| GYF99140 | — | 14 | 12 | 16 | — | 73 | 0~-0.030 | h6 | 2 | — |
| GYF99160 | — | 16 | 16 | 19 | — | 79 | 0~-0.030 | h6 | 2 | — |
| GYF99180 | — | 18 | 16 | 19 | — | 79 | 0~-0.030 | h6 | 2 | — |
| GYF99200 | — | 20 | 20 | 22 | — | 88 | 0~-0.030 | h6 | 2 | — |
| GYF99220 | — | 22 | 20 | 22 | — | 88 | 0~-0.030 | h6 | 2 | — |
| GYF99250 | — | 25 | 25 | 26 | — | 102 | 0~-0.030 | h6 | 2 | — |