Série
EH911
JET-POWER 2 Flute35°Helix Short End mill
SquarePlain Shank
EDP de referência: EH911010
Características técnicas
Tool Material
Micro Grain Carbide
Flute
2Flute
Coating
TiAlN
Helix
35°
Shank Type
Plain (YG-1 Standard)
Feature
- ▶Ultra micro grain carbide
- ▶Reduces chipping of corner edges
- ▶Suitable for low hardness materials(under HRc45), alloy steels, tool steels, carbon steels, prehardened steels, stainless steels, etc
Operações aplicadas
Dimensões (31 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| EH911010 | — | 1 | 4 | 2.5 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911015 | — | 1.5 | 4 | 4 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911020 | — | 2 | 4 | 6 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911025 | — | 2.5 | 4 | 8 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911030 | — | 3 | 6 | 8 | — | 45 | 0~-0.030 | h5 | 2 | — |
| EH911035 | — | 3.5 | 6 | 10 | — | 45 | 0~-0.030 | h5 | 2 | — |
| EH911040 | — | 4 | 6 | 11 | — | 45 | 0~-0.030 | h5 | 2 | — |
| EH911045 | — | 4.5 | 6 | 11 | — | 45 | 0~-0.030 | h5 | 2 | — |
| EH911050 | — | 5 | 6 | 13 | — | 50 | 0~-0.030 | h5 | 2 | — |
| EH911055 | — | 5.5 | 6 | 13 | — | 50 | 0~-0.030 | h5 | 2 | — |
| EH911060 | — | 6 | 6 | 13 | — | 50 | 0~-0.030 | h5 | 2 | — |
| EH911065 | — | 6.5 | 8 | 16 | — | 60 | 0~-0.030 | h5 | 2 | — |
| EH911070 | — | 7 | 8 | 16 | — | 60 | 0~-0.030 | h5 | 2 | — |
| EH911075 | — | 7.5 | 8 | 16 | — | 60 | 0~-0.030 | h5 | 2 | — |
| EH911080 | — | 8 | 8 | 19 | — | 60 | 0~-0.030 | h5 | 2 | — |
| EH911085 | — | 8.5 | 10 | 19 | — | 70 | 0~-0.030 | h5 | 2 | — |
| EH911090 | — | 9 | 10 | 19 | — | 70 | 0~-0.030 | h5 | 2 | — |
| EH911095 | — | 9.5 | 10 | 19 | — | 70 | 0~-0.030 | h5 | 2 | — |
| EH911100 | — | 10 | 10 | 22 | — | 70 | 0~-0.030 | h5 | 2 | — |
| EH911110 | — | 11 | 12 | 22 | — | 75 | 0~-0.030 | h5 | 2 | — |
| EH911120 | — | 12 | 12 | 26 | — | 75 | 0~-0.030 | h5 | 2 | — |
| EH911140 | — | 14 | 16 | 26 | — | 85 | 0~-0.030 | h5 | 2 | — |
| EH911160 | — | 16 | 16 | 32 | — | 100 | 0~-0.030 | h5 | 2 | — |
| EH911180 | — | 18 | 16 | 32 | — | 100 | 0~-0.030 | h5 | 2 | — |
| EH911200 | — | 20 | 20 | 38 | — | 105 | 0~-0.030 | h5 | 2 | — |
| EH911220 | — | 22 | 20 | 38 | — | 105 | 0~-0.030 | h5 | 2 | — |
| EH911250 | — | 25 | 25 | 45 | — | 120 | 0~-0.030 | h5 | 2 | — |
| EH911901 | — | 1 | 6 | 2.5 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911902 | — | 1.5 | 6 | 4 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911903 | — | 2 | 6 | 6 | — | 40 | 0~-0.030 | h5 | 2 | — |
| EH911904 | — | 2.5 | 6 | 8 | — | 40 | 0~-0.030 | h5 | 2 | — |