Série
E5I87
ALU-POWER HPC 3FL 37° Helix Chip-Breaker Corner Radius End Mill
Corner RadiusFlat Shank
EDP de referência: E5I87060
Características técnicas
Tool Material
Flute
3Flute
Helix
37°
Shank Type
Shank_Flat_YSD
Feature
- ▶Balanced cutting with less vibration ▶ Ability to run at higher speeds with less heat in aluminum ▶ Chip Breaker Improves chip evacuation by shortening the chip length ▶ Ability to counteract extreme radial forces
Operações aplicadas
Dimensões (24 itens)
Unidade: mmEDP No. | R Radius | D1 Outside Diameter | D2 Shank Diameter | L1 Length of Cut | L3 Length Below Shank | L2 Overall Length | Mill Dia. Tolerance | Shank Dia.Tolerance | No. of Flute | Taper Angle |
|---|---|---|---|---|---|---|---|---|---|---|
| E5I87060 | R0.25 | 6 | 6 | 13 | — | 57 | +0.008~-0.008 | h5 | 3 | — |
| E5I87080 | R0.25 | 8 | 8 | 19 | — | 63 | +0.009~-0.009 | h5 | 3 | — |
| E5I87100 | R0.5 | 10 | 10 | 22 | — | 72 | +0.010~-0.010 | h5 | 3 | — |
| E5I87120 | R0.5 | 12 | 12 | 26 | — | 83 | +0.010~-0.010 | h5 | 3 | — |
| E5I87160 | R1 | 16 | 16 | 32 | — | 92 | +0.010~-0.010 | h5 | 3 | — |
| E5I87200 | R1 | 20 | 20 | 38 | — | 104 | +0.013~-0.013 | h5 | 3 | — |
| E5I87901 | R1.5 | 6 | 6 | 13 | — | 57 | +0.008~-0.008 | h5 | 3 | — |
| E5I87902 | R0.25 | 6 | 6 | 24 | — | 75 | +0.008~-0.008 | h5 | 3 | — |
| E5I87903 | R1.5 | 6 | 6 | 24 | — | 75 | +0.008~-0.008 | h5 | 3 | — |
| E5I87904 | R2 | 8 | 8 | 19 | — | 63 | +0.009~-0.009 | h5 | 3 | — |
| E5I87905 | R0.25 | 8 | 8 | 32 | — | 75 | +0.009~-0.009 | h5 | 3 | — |
| E5I87906 | R2 | 8 | 8 | 32 | — | 75 | +0.009~-0.009 | h5 | 3 | — |
| E5I87907 | R2 | 10 | 10 | 22 | — | 72 | +0.010~-0.010 | h5 | 3 | — |
| E5I87908 | R0.5 | 10 | 10 | 40 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I87909 | R2 | 10 | 10 | 40 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I87910 | R3 | 12 | 12 | 26 | — | 83 | +0.010~-0.010 | h5 | 3 | — |
| E5I87911 | R0.5 | 12 | 12 | 48 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I87912 | R3 | 12 | 12 | 48 | — | 100 | +0.010~-0.010 | h5 | 3 | — |
| E5I87913 | R4 | 16 | 16 | 32 | — | 92 | +0.010~-0.010 | h5 | 3 | — |
| E5I87914 | R1 | 16 | 16 | 64 | — | 125 | +0.010~-0.010 | h5 | 3 | — |
| E5I87915 | R4 | 16 | 16 | 64 | — | 125 | +0.010~-0.010 | h5 | 3 | — |
| E5I87916 | R4 | 20 | 20 | 38 | — | 104 | +0.013~-0.013 | h5 | 3 | — |
| E5I87917 | R1 | 20 | 20 | 80 | — | 150 | +0.013~-0.013 | h5 | 3 | — |
| E5I87918 | R4 | 20 | 20 | 80 | — | 150 | +0.013~-0.013 | h5 | 3 | — |